Saturday, May 19, 2012

Assignment No. 2 :


Assignment No. 2 :


1: File - Save as - [Last Name][First Initial]_ARC4058_Assignment_2_[type of drawing, ie. plans, sections, elevations, axonometric]


2: Be sure Units is on "Architectural", "Decimal Degrees" & "Inches"


3: Draw the 4 x 4 House Floorplans by Tadao Ando:
     Part 1 - Part 2 
  • 4 - Plans         (per  Ando_4x4House_2)
  • 1 - Site Plan   (per  Ando_4x4House_2)
  • 4 - Elevations (per  Ando_4x4House_3)
  • *BONUS*    1 - Section (per  Ando_4x4House_4)
  • *BONUS 2* 1 - Axonometric @ 45 degrees (per  Ando_4x4House_5)
    4: Label Each Drawing - ie. First Level Floor Plan -  Second Level Floor Plan - Third Level Floor Plan - Fourth Level Floor Plan - Site Plan - Front Elevation - Rear Elevation - Side Elevation 1 - Side Elevation 2


    5: Layers - Plot with Layers - assignment_2_layers


    6: Plot - DWG to PDF - Scale 1/8" = 1'-0" - Paper Size 11" x 17"


    7: Post JPEG on Blog (top-right corner : New Post - Insert JPEG - Publish Post!) ONLY if you have any questions pertaining to the assignment.  You do NOT need to post on the blog for this assignment.


    8: Email the CAD Drawing + PDF to ecalil@fiu.edu  as attachments.


    9: Title email + Blogpost : [Last Name][First Initial]_ARC4058_Assignment_2


    Due Date:  Part 1 - 5-30-12 (Wednesday) by 11:59 PM
                     Part 2 - 6-6-12 (Wednesday) by 11:59 PM
    Posted by at 1:53 PM
    Labels:

    6 comments:

    1. Adam BiermanMay 29, 2012 at 5:03 PM

      Can we post and get credit for both the bonus items next Weds.?

      ReplyDelete
    2. Sarah MalebrancheMay 30, 2012 at 10:52 AM

      Is Bonus 1 for Part 1 ?

      ReplyDelete
    3. Eduardo Calil JrMay 30, 2012 at 2:00 PM

      adam: yes
      sarah: bonuses can be completed by part 2.

      ReplyDelete
    4. Estefany AlmodovarJune 3, 2012 at 6:52 PM

      Professor, in the rear elevation, the rectangle sticking out, the concrete blocks are supposed to be closer too, right? Because if yes, the line of the rectangle sticking out is w layer a_elev_1 and the lines inside should be thicker too, not the same line weight as the back part which is a little farther. let me know thank you

      ReplyDelete
    5. Eduardo Calil JrJune 4, 2012 at 10:30 PM

      You may leave the cantilever (rectangle sticking out) as the same layer as the closest walls (a_elev_1). I won't take away points for missing that, but I greatly appreciate your observation! So, yes, you are correct.

      ReplyDelete
    6. Sarah MalebrancheJune 6, 2012 at 8:43 PM

      Professor, including the bonus there is a total of 4 JPEG. Do you need us to post each JPEG individually or can we post it all together under the appropriate title [lastname,name....] ??

      ReplyDelete

    Subscribe to: Post Comments (Atom)